September 19, 2017, 11:32 pm
There is finally good news from an Intel developer when it comes to the HDMI audio passthrough problems that we’ve been seeing with the Intel Apollo Lake and Kaby Lake based devices that utilize an LSPCon to convert the DP 1.2 signal to HDMI 2.0 signal. Previously DTS-X, DTS-HD and Dolby TrueHD audio formats were not working at all under Linux, even if they were ok under Windows.
Why this was important? Well, for example, it was basically impossible to hear any Dolby Atmos content on LibreELEC or any other Linux distribution. Until this day I have not really been able to recommend the Apollo Lake devices for HTPC usage.
In any case, there’s a suggested kernel patch in this bug report. There are already reports of the patch actually fixing the passthrough issue so it sounds very promising. There will probably be a LibreELEC test build with this patch available tomorrow. I’ll definitely try that one out and report my findings as soon as I’ve tested this.
So as a reminder, the HDMI (LSPCon) firmware will needs to be updated if you haven’t done that yet. The latest update from March 2017 is 1.66 and available here. I did write an article describing the update procedure earlier this year.
Source:The NUC Blog
↧
September 20, 2017, 2:21 am
Promotion Sales: https://goo.gl/gRgCxr DOOGEE MIX 4GB RAM 64GB ROM Helio P25 5.5" Bezel-less AMOLED Screen Android 7 Highlights
- 5.5 Inch Samsung Super AMOLED Screen, 1280*720 Pixel
- Helio P25 MTK6757CD 2.5GHz Octa Core
- Support Touch ID
- 4GB RAM + 64GB ROM, Support TF Card Expansion
- 16 MP & 8 MP PDAF Dual Back Camera + 5 MP Front Camera
- Android 7.0 System
- Dual SIM: Micro SIM + NANO SIM / TF Card (Another SIM Slot Can Be Used in Combination with a NANO SIM Card or a TF Card)
- Band: GSM 850/900/1800/1900MHz, WCDMA 900/2100MHz, FDD-LTE B1/B3/B7/B8/B20, Support 2G & 3G & 4G LTE Network
You Can Buy It Here: https://goo.gl/8NfqWC
DOOGEE BL5000 4GB RAM 64GB ROM 5.5 Inch FHD Screen Dual Camera Android 7.0 Highlights
- 5.5 Inch Screen, 1920*1080 Pixel
- MTK6750T 1.5GHz Octa Core
- Support Touch ID
- 4GB RAM + 64GB ROM, Support TF Card Expansion
- 13 MP & 0.3 MP (SW 13 MP) Dual Back Camera + 8 MP Front Camera
- Android 7.0 System
- 8 Curves Design
- 5050mAh Battery, Support Fast Charging
- Dual SIM: NANO SIM + NANO SIM / TF Card (The SIM Slot Can Be Used in Combination with a NANO SIM Card or a TF Card)
- Band: GSM 850/900/1800/1900MHz, WCDMA 900/2100MHz, FDD-LTE B1/B3/B7/B8/B20, Support 2G & 3G & 4G LTE Networ
Buy Here: https://goo.gl/9LZGvV
DOOGEE BL7000 7060mAh 4GB RAM 64GB ROM 5.5 InchDual Camera Android 7.0 Highlights
- 5.5 Inch 2.5D Screen, 1920*1080 Pixel
- MTK6750T 1.5GHz Octa Core
- Support Touch ID
- 4GB RAM + 64GB ROM, Support TF Card Expansion
- 13 MP & 3 MP (SW 13 MP) Dual Back Camera + 13 MP Front Camera
- Android 7.0 System
- 7060mAh Battery, Support 12V 2A Fast Charging
- Band: GSM 850/900/1800/1900MHz, WCDMA 850/900/2100MHz, FDD-LTE B1/B3/B7/B8/B20, Support 2G & 3G & 4G LTE Network
Buy Here: https://goo.gl/uAvFhP
↧
↧
September 20, 2017, 2:34 am
Hi,
Since upgrading my Beelink GT1 Ultimate using USB burning tool to Android 7 (build 703) from Android 6 that it shipped with, now I can no longer pair my Bluetooth 4 mouse (Logitech MX Anywhere 2 model). The Beelink finds mouse but is for ever displaying "pairing" message and never actually pairs. This same mouse worked perfectly before with the GT1 under Android 6.
Has anyone else noticed this problem with Beelink GT1 Ult and/or got a fix please?
Cheers
↧
September 20, 2017, 2:36 am
CUBOT X18 3GB RAM 32GB ROM MTK6737T 1.5GHz Quad Core 5.7 Inch 2.5D IPS Screen Android 7.0 4G LTE Smartphone
link: https://goo.gl/wtbKpR
Highlights - 5.7 Inch 2.5D IPS Screen, 1440*720 Pixel
- MTK6737T 1.5GHz Quad Core
- Support Touch ID
- 3GB RAM + 32GB ROM, Support TF Card Expansion
- 16 MP Back Camera + 13 MP Front Camera
- Android 7.0 System
- 3200mAh Battery
- Dual SIM: Micro SIM + Micro SIM + TF Card, three Card Slot
- Band: GSM 850/900/1800/1900MHz, WCDMA 900/2100MHz, FDD-LTE B1/B3/B7/B8/B20, Support 2G & 3G & 4G LTE Network
![]()
![]()
![]()
![]()
![]()
↧
September 20, 2017, 4:54 am
↧
↧
September 20, 2017, 10:00 am
DOOGEE BL7000 Android 7.0 Big battery at 7060mAh 12V2A Quick Charge 5.5'' FHD MTK6750T Octa Core 4GB RAM 64GB ROM Smartphone Dual 13.0MP Camera
![]()
Hi Guys,In this review im going to be looking at the new Doogee BL7000 from lightinthebox.The Doogee BL7000 comes with Android 7 out of the box, A massive 7060mAh battery and dual 13MP rear camera that does give some impressive photos not forgetting the front facing 13MP camera.
Quick facts
Display: 5.5 inch, 1920 x 1080 pixels FHD screen
CPU: MTK6750T Octa Core 1.5GHz
System: Android 7.0
Camera: 13.0MP + 13.0MP dual rear cameras + 13.0MP front camera
Sensor: Ambient Light Sensor, Gravity Sensor, Proximity Sensor
SIM Card: dual SIM dual standby, 1 Nano SIM Card + 1 Nano SIM Card or 1 Nano SIM Card + 1 TF Card
Feature: GPS
Network:
GSM 850/900/1800/1900MHz
WCDMA 850/900/2100MHz
FDD-LTE 800/900/1800/2100/2600MHz
7060mAh battery
Looks & Build
The Doogee BL7000 does feel very well made,not too big in the hand but a little on the hevay side but i guess thats down to the big 7060mAh battery.
The front of the Doogee BL7000
Its nice to see the fingerprint scanner on the front on the Doogee BL7000 & it works very well one of the best of used so far first time everytime.
![]()
The rear of the phone,Showing the twin camera
![]()
The right hand side,The volume rocker,power button and sim tray
![]()
The bottom of the phone,Showing the speaker and the mic
![]()
The top of the phone,Has the 3.5mm headphone jack
![]()
The boot time on the doogee BL7000 is around 50 seconds taking you to the home screen
Home Screen
A nice clean looking home screen with no crappy bloatwhere installed
![]()
App Draw
![]()
Iv been using the Doogee BL7000 now for the past week & its not a bad phone for the price.I spend a lot of time using the internet on my phones & taking photos and i just love the results of the twin camera giving a great depth ao feild to the photos.
Using the phone daily the Doogee BL7000 has done its job the 4G signal is the same as other my 4G phone's so no problem with network signal's.The wifi on the phone seems strong picking up the all the wireless networks as my other phones do,Also the bluetooth works as it should.
The phone speaker is good giving a nice sound to music played on the device,In the sound menue you have sound enhancment where there is another 3 options,1, being BesAudEnh (Audio enhancer for earphones)2.BesLoudness (Volume booster for the speaker)And 3. BesSurround for Movies or Music Mode.
Camera Photos
Im loving the camera on this thing its been giving me some great results
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Some Tech Stuff
Antutu
![]()
10 Point touch screen
![]()
CPU Z
![]()
![]()
![]()
![]()
![]()
![]()
Wifi Test on my 38MBPS home broadband
![]()
GPS
The gps was nice and fast to get a good fix after 10 seconds
![]()
![]()
Battery info
![]()
A little disappointing from a 100% full charge down to 7% in 11 hours.That's with one 2 minute phone call and 37 photos taken (About an hour of camera usage)the rest of the time in my pocket on standby,Something seems to be sucking the battery dry iv made sure there's nothing running too,On a phone with 7060mAh battery i would of at least hoped for 2 days usage.
Now i played a youtube video over WIFI to see how long the battery will last,From a 100% charge
Down to 90% after 20 minutes
Down to 82% after 40 minutes
Down to 74% after 60 minutes
Down to 63% after 1 hour 20
Down to 54% after 1 hour 40
Down to 45% after 2 hours
Down to 36% after 2 hour 20
Down to 26% after 2 hour 40
Down to 17% after 3 hours
Battery 15% warning came on at 3 hours 4 minutes
Down to 8% after 3 hour 20
5% battery warning after 3 hour 24 minutes
Down to 1% after 3 hours 40
Still at 1% after 4 hours
Still at 1% after 4 hour 20
Still at 1% after 4 hour 40
The phone has just started to struggle at 5 hours loosing wifi & will no longer play the video
![]()
So it seems the battery indicator is out of calibration as the phone is still going but showing 1% (A firmware update could fix it maybe)The maximum iv got the phone to last is around 5 hours with the screen on and 25 hours of the phone being switched on but not used.For normal use this phone will need to be charged everyday.
I tested the phone with asphalt 8, A little slow on loading but it played fine,
Video Review
Specifications
Basic Information
Brand: DOOGEE
OS: Android 7.0
Language: English, Spanish, Portuguese (Brazil), Portuguese (Portugal), Italian, German, French, Russian, Arabic, Malay, Thai, Greek, Ukrainian, Croatian, Czech
SIM Card Slot: Dual SIM,Dual Standby
SIM Card Type: Nano SIM Card
Network
3G,4G,Bluetooth,GPS,GSM,WiFi
WIFI: 802.11b/g/n wireless internet
Network type: FDD-LTE,GSM,WCDMA
2G: GSM 1800MHz,GSM 1900MHz,GSM 850MHz,GSM 900MHz
3G: WCDMA B1 2100MHz,WCDMA B5 850MHz,WCDMA B8 900MHz
4G LTE: FDD B1 2100MHz,FDD B20 800MHz,FDD B3 1800MHz,FDDB7 2600MHz,FDD B8 900MHz
Camera
Camera type: Triple cameras
Back-camera: 13.0MP + 13.0MP
Front camera: 13.0MP
Video recording: Yes
Touch Focus: Yes
Auto Focus: Yes
Hardware
CPU: MTK6750T
Cores: 1.5GHz,Octa Core
RAM: 4GB RAM
ROM: 64GB
External Memory: TF card up to 128GB (not included)
Display
Screen type: Capacitive 10 Point touch screen
Screen size: 5.5 inch
Screen resolution: 1920 x 1080 (FHD)
Media Formats
Picture format: BMP,GIF,JPEG,JPG,PNG
Music format: AAC,MP3
Video format: AVI,MP4,WMV
Battery
Battery Capacity (mAh): 7060mAh
Battery Type: Non-removable
Dimensions and Weight
Product size: 15.52 x 7.59 x 1.03 cm / 6.11 x 2.99 x 0.41 inches
Package size: 18.20 x 10.07 x 5.95 cm / 7.17 x 3.96 x 2.34 inches
Product weight: 0.2100 kg
Package weight: 0.4810 kg
Package Contents
Cell Phone:1 Doogee BL7000
Power Adapter:1
USB Cable:1
Needle:1
OTG Cable:1
User's Manual:1
Screen Protector:1
Protective Case:1
Unboxing Video
↧
September 20, 2017, 10:00 am
DOOGEE BL7000 Android 7.0 Big battery at 7060mAh 12V2A Quick Charge 5.5'' FHD MTK6750T Octa Core 4GB RAM 64GB ROM Smartphone Dual 13.0MP Camera
![]()
Hi Guys,In this review im going to be looking at the new Doogee BL7000 from lightinthebox.The Doogee BL7000 comes with Android 7 out of the box, A massive 7060mAh battery and dual 13MP rear camera that does give some impressive photos not forgetting the front facing 13MP camera.
Quick facts
Display: 5.5 inch, 1920 x 1080 pixels FHD screen
CPU: MTK6750T Octa Core 1.5GHz
System: Android 7.0
Camera: 13.0MP + 13.0MP dual rear cameras + 13.0MP front camera
Sensor: Ambient Light Sensor, Gravity Sensor, Proximity Sensor
SIM Card: dual SIM dual standby, 1 Nano SIM Card + 1 Nano SIM Card or 1 Nano SIM Card + 1 TF Card
Feature: GPS
Network:
GSM 850/900/1800/1900MHz
WCDMA 850/900/2100MHz
FDD-LTE 800/900/1800/2100/2600MHz
7060mAh battery
Looks & Build
The Doogee BL7000 does feel very well made,not too big in the hand but a little on the hevay side but i guess thats down to the big 7060mAh battery.
The front of the Doogee BL7000
Its nice to see the fingerprint scanner on the front on the Doogee BL7000 & it works very well one of the best of used so far first time everytime.
![]()
The rear of the phone,Showing the twin camera
![]()
The right hand side,The volume rocker,power button and sim tray
![]()
The bottom of the phone,Showing the speaker and the mic
![]()
The top of the phone,Has the 3.5mm headphone jack
![]()
The boot time on the doogee BL7000 is around 50 seconds taking you to the home screen
Home Screen
A nice clean looking home screen with no crappy bloatwhere installed
![]()
App Draw
![]()
Iv been using the Doogee BL7000 now for the past week & its not a bad phone for the price.I spend a lot of time using the internet on my phones & taking photos and i just love the results of the twin camera giving a great depth ao feild to the photos.
Using the phone daily the Doogee BL7000 has done its job the 4G signal is the same as other my 4G phone's so no problem with network signal's.The wifi on the phone seems strong picking up the all the wireless networks as my other phones do,Also the bluetooth works as it should.
The phone speaker is good giving a nice sound to music played on the device,In the sound menue you have sound enhancment where there is another 3 options,1, being BesAudEnh (Audio enhancer for earphones)2.BesLoudness (Volume booster for the speaker)And 3. BesSurround for Movies or Music Mode.
Camera Photos
Im loving the camera on this thing its been giving me some great results
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Some Tech Stuff
Antutu
![]()
10 Point touch screen
![]()
CPU Z
![]()
![]()
![]()
![]()
![]()
![]()
Wifi Test on my 38MBPS home broadband
![]()
GPS
The gps was nice and fast to get a good fix after 10 seconds
![]()
![]()
Battery info
![]()
A little disappointing from a 100% full charge down to 7% in 11 hours.That's with one 2 minute phone call and 37 photos taken (About an hour of camera usage)the rest of the time in my pocket on standby,Something seems to be sucking the battery dry iv made sure there's nothing running too,On a phone with 7060mAh battery i would of at least hoped for 2 days usage.
Now i played a youtube video over WIFI to see how long the battery will last,From a 100% charge
Down to 90% after 20 minutes
Down to 82% after 40 minutes
Down to 74% after 60 minutes
Down to 63% after 1 hour 20
Down to 54% after 1 hour 40
Down to 45% after 2 hours
Down to 36% after 2 hour 20
Down to 26% after 2 hour 40
Down to 17% after 3 hours
Battery 15% warning came on at 3 hours 4 minutes
Down to 8% after 3 hour 20
5% battery warning after 3 hour 24 minutes
Down to 1% after 3 hours 40
Still at 1% after 4 hours
Still at 1% after 4 hour 20
Still at 1% after 4 hour 40
The phone has just started to struggle at 5 hours loosing wifi & will no longer play the video
![]()
So it seems the battery indicator is out of calibration as the phone is still going but showing 1% (A firmware update could fix it maybe)The maximum iv got the phone to last is around 5 hours with the screen on and 25 hours of the phone being switched on but not used.For normal use this phone will need to be charged everyday.
I tested the phone with asphalt 8, A little slow on loading but it played fine,
Video Review
Specifications
Basic Information
Brand: DOOGEE
OS: Android 7.0
Language: English, Spanish, Portuguese (Brazil), Portuguese (Portugal), Italian, German, French, Russian, Arabic, Malay, Thai, Greek, Ukrainian, Croatian, Czech
SIM Card Slot: Dual SIM,Dual Standby
SIM Card Type: Nano SIM Card
Network
3G,4G,Bluetooth,GPS,GSM,WiFi
WIFI: 802.11b/g/n wireless internet
Network type: FDD-LTE,GSM,WCDMA
2G: GSM 1800MHz,GSM 1900MHz,GSM 850MHz,GSM 900MHz
3G: WCDMA B1 2100MHz,WCDMA B5 850MHz,WCDMA B8 900MHz
4G LTE: FDD B1 2100MHz,FDD B20 800MHz,FDD B3 1800MHz,FDDB7 2600MHz,FDD B8 900MHz
Camera
Camera type: Triple cameras
Back-camera: 13.0MP + 13.0MP
Front camera: 13.0MP
Video recording: Yes
Touch Focus: Yes
Auto Focus: Yes
Hardware
CPU: MTK6750T
Cores: 1.5GHz,Octa Core
RAM: 4GB RAM
ROM: 64GB
External Memory: TF card up to 128GB (not included)
Display
Screen type: Capacitive 10 Point touch screen
Screen size: 5.5 inch
Screen resolution: 1920 x 1080 (FHD)
Media Formats
Picture format: BMP,GIF,JPEG,JPG,PNG
Music format: AAC,MP3
Video format: AVI,MP4,WMV
Battery
Battery Capacity (mAh): 7060mAh
Battery Type: Non-removable
Dimensions and Weight
Product size: 15.52 x 7.59 x 1.03 cm / 6.11 x 2.99 x 0.41 inches
Package size: 18.20 x 10.07 x 5.95 cm / 7.17 x 3.96 x 2.34 inches
Product weight: 0.2100 kg
Package weight: 0.4810 kg
Package Contents
Cell Phone:1 Doogee BL7000
Power Adapter:1
USB Cable:1
Needle:1
OTG Cable:1
User's Manual:1
Screen Protector:1
Protective Case:1
Unboxing Video
↧
September 20, 2017, 10:10 am
DOOGEE BL7000 Android 7.0 Big battery at 7060mAh 12V2A Quick Charge 5.5'' FHD MTK6750T Octa Core 4GB RAM 64GB ROM Smartphone Dual 13.0MP Camera
![]()
Hi Guys,In this review im going to be looking at the new Doogee BL7000 from lightinthebox.The Doogee BL7000 comes with Android 7 out of the box, A massive 7060mAh battery and dual 13MP rear camera that does give some impressive photos not forgetting the front facing 13MP camera.
Quick facts
Display: 5.5 inch, 1920 x 1080 pixels FHD screen
CPU: MTK6750T Octa Core 1.5GHz
System: Android 7.0
Camera: 13.0MP + 13.0MP dual rear cameras + 13.0MP front camera
Sensor: Ambient Light Sensor, Gravity Sensor, Proximity Sensor
SIM Card: dual SIM dual standby, 1 Nano SIM Card + 1 Nano SIM Card or 1 Nano SIM Card + 1 TF Card
Feature: GPS
Network:
GSM 850/900/1800/1900MHz
WCDMA 850/900/2100MHz
FDD-LTE 800/900/1800/2100/2600MHz
7060mAh battery
Looks & Build
The Doogee BL7000 does feel very well made,not too big in the hand but a little on the hevay side but i guess thats down to the big 7060mAh battery.
The front of the Doogee BL7000
Its nice to see the fingerprint scanner on the front on the Doogee BL7000 & it works very well one of the best of used so far first time everytime.
![]()
The rear of the phone,Showing the twin camera
![]()
The right hand side,The volume rocker,power button and sim tray
![]()
The bottom of the phone,Showing the speaker and the mic
![]()
The top of the phone,Has the 3.5mm headphone jack
![]()
The boot time on the doogee BL7000 is around 50 seconds taking you to the home screen
Home Screen
A nice clean looking home screen with no crappy bloatwhere installed
![]()
App Draw
![]()
Iv been using the Doogee BL7000 now for the past week & its not a bad phone for the price.I spend a lot of time using the internet on my phones & taking photos and i just love the results of the twin camera giving a great depth ao feild to the photos.
Using the phone daily the Doogee BL7000 has done its job the 4G signal is the same as other my 4G phone's so no problem with network signal's.The wifi on the phone seems strong picking up the all the wireless networks as my other phones do,Also the bluetooth works as it should.
The phone speaker is good giving a nice sound to music played on the device,In the sound menue you have sound enhancment where there is another 3 options,1, being BesAudEnh (Audio enhancer for earphones)2.BesLoudness (Volume booster for the speaker)And 3. BesSurround for Movies or Music Mode.
Camera Photos
Im loving the camera on this thing its been giving me some great results
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Some Tech Stuff
Antutu
![]()
10 Point touch screen
![]()
CPU Z
![]()
![]()
![]()
![]()
![]()
![]()
Wifi Test on my 38MBPS home broadband
![]()
GPS
The gps was nice and fast to get a good fix after 10 seconds
![]()
![]()
Battery info
![]()
A little disappointing from a 100% full charge down to 7% in 11 hours.That's with one 2 minute phone call and 37 photos taken (About an hour of camera usage)the rest of the time in my pocket on standby,Something seems to be sucking the battery dry iv made sure there's nothing running too,On a phone with 7060mAh battery i would of at least hoped for 2 days usage.
Now i played a youtube video over WIFI to see how long the battery will last,From a 100% charge
Down to 90% after 20 minutes
Down to 82% after 40 minutes
Down to 74% after 60 minutes
Down to 63% after 1 hour 20
Down to 54% after 1 hour 40
Down to 45% after 2 hours
Down to 36% after 2 hour 20
Down to 26% after 2 hour 40
Down to 17% after 3 hours
Battery 15% warning came on at 3 hours 4 minutes
Down to 8% after 3 hour 20
5% battery warning after 3 hour 24 minutes
Down to 1% after 3 hours 40
Still at 1% after 4 hours
Still at 1% after 4 hour 20
Still at 1% after 4 hour 40
The phone has just started to struggle at 5 hours loosing wifi & will no longer play the video
![]()
So it seems the battery indicator is out of calibration as the phone is still going but showing 1% (A firmware update could fix it maybe)The maximum iv got the phone to last is around 5 hours with the screen on and 25 hours of the phone being switched on but not used.For normal use this phone will need to be charged everyday.
I tested the phone with asphalt 8, A little slow on loading but it played fine,
Video Review
Specifications
Basic Information
Brand: DOOGEE
OS: Android 7.0
Language: English, Spanish, Portuguese (Brazil), Portuguese (Portugal), Italian, German, French, Russian, Arabic, Malay, Thai, Greek, Ukrainian, Croatian, Czech
SIM Card Slot: Dual SIM,Dual Standby
SIM Card Type: Nano SIM Card
Network
3G,4G,Bluetooth,GPS,GSM,WiFi
WIFI: 802.11b/g/n wireless internet
Network type: FDD-LTE,GSM,WCDMA
2G: GSM 1800MHz,GSM 1900MHz,GSM 850MHz,GSM 900MHz
3G: WCDMA B1 2100MHz,WCDMA B5 850MHz,WCDMA B8 900MHz
4G LTE: FDD B1 2100MHz,FDD B20 800MHz,FDD B3 1800MHz,FDDB7 2600MHz,FDD B8 900MHz
Camera
Camera type: Triple cameras
Back-camera: 13.0MP + 13.0MP
Front camera: 13.0MP
Video recording: Yes
Touch Focus: Yes
Auto Focus: Yes
Hardware
CPU: MTK6750T
Cores: 1.5GHz,Octa Core
RAM: 4GB RAM
ROM: 64GB
External Memory: TF card up to 128GB (not included)
Display
Screen type: Capacitive 10 Point touch screen
Screen size: 5.5 inch
Screen resolution: 1920 x 1080 (FHD)
Media Formats
Picture format: BMP,GIF,JPEG,JPG,PNG
Music format: AAC,MP3
Video format: AVI,MP4,WMV
Battery
Battery Capacity (mAh): 7060mAh
Battery Type: Non-removable
Dimensions and Weight
Product size: 15.52 x 7.59 x 1.03 cm / 6.11 x 2.99 x 0.41 inches
Package size: 18.20 x 10.07 x 5.95 cm / 7.17 x 3.96 x 2.34 inches
Product weight: 0.2100 kg
Package weight: 0.4810 kg
Package Contents
Cell Phone:1 Doogee BL7000
Power Adapter:1
USB Cable:1
Needle:1
OTG Cable:1
User's Manual:1
Screen Protector:1
Protective Case:1
Unboxing Video
For Further Discussion Go HERE
↧
September 20, 2017, 10:54 am
Hi,
I just bought a Cube iPlay 10 from gearbest.
I have following problem right away when first time boot:
- It take more than 3 minutes to boot.
- After boot, there is error: process system isn't responding
Any idea how to fix this on the bran new Cube?
Thanks in advance for your help,
sviet
↧
↧
September 20, 2017, 1:37 pm
![Click image for larger version
Name: vv.png
Views: 1
Size: 120.3 KB
ID: 672075]()
Intel Core i7-6700HQ VORKE V6 MINI PC is powered by the Intel Core i7-6700HQ which is a quad-core processor based on the Skylake architecture, that has been launched in September 2015. In addition to four CPU cores with Hyper-Threading clocked at 2.6 - 3.5 GHz, the chip also integrates an HD Graphics 530 GPU and a dual-channel DDR4-2133/DDR3L-1600 memory controller.
Dual Channel DDR4 32GB RAM, Dual M.2 22*80 SSD
It boasts dual channel DDR4 32GB RAM, dual M.2 22*80 SSD, ascribing to which it delivers a richer end-user experience. On top of that, it brings access to additional storage via SATA hard drives.
Dual Band WIFI
With support for 2.4Ghz and 5Ghz band, it can transmit higher amounts of data, and its naturally less congested.
Gigabit LAN
Gigabit LAN can improve the net speed and the performance to a large extent.
Geekbuying
↧
September 20, 2017, 2:34 pm
Firefly-RK3399 is a development board powered by Rockchip RK3399, and the company behind the board has now launched a system-on-module called RK3399 Coreboard with 2 to 4GB RAM, 8 to 128GB flash, a PMIC, and a 314-pin MXM 3.0 edge connector exposing various I/Os.
![]()
RK3399 CoreBoard specifications:- SoC – Rockchip RK3399 hexa-core big.LITTLE processor with dual core ARM Cortex A72 up to 2.0 GHz and quad core Cortex A53 processor, ARM Mali-T860 MP4 GPU with OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL and DX 11 support
- System Memory – 2GB or 4GB DDR3
- Storage – 8, 16, 32 or 128 GB eMMC flash
- Carrier Board Interface – 314-pin MXM 3.0 edge connector with Ethernet, PCIe, HDMI 2.0, DP 1.2, MIPI DSI, eDP 1.3, S/PDIF, I2S, GPIO, USB, etc… signals
- Power Supply – 5V/3A input; RK808 PMIC
- Dimensions – 82 x 63 mm
- Weight – 24 grams
The company provides support for Android 6.0.1 and Ubuntu 16.04 for the module, and we should expect thesame kind of support as for Firefly-RK3399 board. In order to help their customers getting started before they design their own custom board for the module, T-Firefly also offers a complete development kit combining RK3399 Coreboard with a carrier board.
![]()
Click to Enlarge
The carrier board – which they call backplane – exposes the following interfaces and I/Os:- Video Output – HDMI 2.0, MIPI DSI, DVP interface, eDP 1.3
- Camera – MIPI CSI
- Audio – Audio in/out, built-in microphone, speaker header, optical S/PDIF, MIC IN header, LINE OUT header
- Storage – 2.5″drive SATA connector (back of the board), PCIe M.2 M key, micro SD card slot
- Connectivity – Gigabit Ethernet (RJ45), Fast Ethernet (RJ45), WiFi and Bluetooth module, mini PCIe slot for LTE module + SIM card slot
- USB – 2x USB 2.0 host ports, 1x USB 3.0 port, 1x USB type C port, micro USB port
- Expansion – 30-pin GPIO header
- Misc – IR receiver, power/recovery/reset keys, RTC battery header, fan connector
- Power Supply – Via power barrel jack
- Dimensions – TBD
Either they’ve hidden it well, or they don’t have product page for RK3399 Coreboard on their website, and the only place where we’ll find some information isRK3399 Coreboard page in their online shop with the SoM going for $95 with 2GB RAM, 8GB flash, and $119 with 4GB RAM, 16GB flash, The development kit and variant of the SoM are not sold online (anymore), so you’d have to contact them to find about pricing and availability.
Source
CNXSoft
↧
September 20, 2017, 6:21 pm
↧
September 20, 2017, 8:29 pm
![]()
Measy W2H Mini Wireless HDMI Video Transmitter and Receiver HD1080P Extender up to 10M/33 Feet
Highlights
One-key to match
After the first paring, there is no need of any operation to connect again. It will pair automatically.
1080P@60HZ
Uncompressed and undelayed transmission offers excellent user experience. It support many games smoothly, like Need for Speed.
Wireless transmission
The max wireless transmission distance is 10m which is long enough for home or office use.
Specification
| General |
Model: W2H mini
Quantity: 1 Piece
Color: Black |
| Specification |
HDMI version:HDMI 1.4a
HDMI resolution: up to 1920x1080/60Hz
Support audio format: DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD
Max bandwidth: 148.5MHz
Max baud rate: 485Gbps
Input cable distance: (1080p resolution) ≤8m AWG26 HDMI standard cable
Output cable distance: (1080p resolution) ≤8m AWG26 HDMI standard cable
Max working current: 650mA
Power input: DC5V/1A
Frequency: 60GHz(59~66GHz)
Security protocol: HDCP
Transmission range: 10m
Power consumption: transmitter 5w(max), receiver2.5w(max)
Operating Temperature range : -15 Celsius to +55 Celsius |
| Weight & Dimension |
Dimension (L x W x H): 87x87x21(mm)
Weight: 200g |
| Package Contents |
1 x Transmitter
1 x Receiver
2 x USB cable
1 x Remote control
1 x Power adater(A right AC Adapter will be sent as your shipping country)
1 x User manual |
![]()
Buy now:https://goo.gl/4MJ4FC
↧
↧
September 20, 2017, 10:22 pm
↧
September 20, 2017, 11:22 pm
↧
September 20, 2017, 11:35 pm
A new report by Cisco's Talos Group suggests that the CCleaner hack was more sophisticated than initially thought. The researchers found evidence of a second payload during their analysis of the malware which targeted very specific groups based on domains.
On September 18, 2017Piriform reported that the company's infrastructure distributed a malicious version of the file cleaning software CCleaner for about a month.
The company's infrastructure was compromised, and users who downloaded version 5.33 of CCleaner from the website or used automatic updates to install it, got the infected version on their system.
We talked about methods to identify if an infected version is installed on the system. Probably the best indicator, apart from checking CCleaner's version, is to check for the existence of Registry keys under HKLM\SOFTWARE\Piriform\Agomo.
![]()
Piriform was quick to state that users could resolve the issue by updating to the new malware-free version of CCleaner.
A new report suggests that this may not be enough.
Talos Group found evidence that the attack was more sophisticated, as it targeted a specific list of domains with a second payload.- singtel.corp.root
- htcgroup.corp
- samsung-breda
- samsung
- samsung.sepm
- samsung.sk
- jp.sony.com
- am.sony.com
- gg.gauselmann.com
- vmware.com
- ger.corp.intel.com
- amr.corp.intel.com
- ntdev.corp.microsoft.com
- cisco.com
- uk.pri.o2.com
- vf-es.internal.vodafone.com
- linksys
- apo.epson.net
- msi.com.tw
- infoview2u.dvrdns.org
- dfw01.corp.akamai.com
- hq.gmail.com
- dlink.com
- test.com
The researchers suggest that the attacker was after intellectual property based on the list of domains that belong to high profile tech companies.Interestingly the array specified contains Cisco's domain (cisco.com) along with other high-profile technology companies. This would suggest a very focused actor after valuable intellectual property.
Talos Group suggested to restore the computer system using a backup that was created prior to the infection. The new evidence reinforces this, and the researchers suggest strongly that it may not be enough to simply update CCleaner to get rid of the malware.These findings also support and reinforce our previous recommendation that those impacted by this supply chain attack should not simply remove the affected version of CCleaner or update to the latest version, but should restore from backups or reimage systems to ensure that they completely remove not only the backdoored version of CCleaner but also any other malware that may be resident on the system.
The stage 2 installer is GeeSetup_x86.dll. It checks the version of the operating system, and plants a 32-bit or 64-bit version of the trojan on the system based on the check.
Read also: Deterministic password manager Issues
The 32-bit trojan is TSMSISrv.dll, the 64-bit trojan is EFACli64.dll. Identifying Stage 2 Payloads
The following information helps identify if a stage 2 payload has been planted on the system.
Registry Keys:- HKLM\Software\Microsoft\Windows NT\CurrentVersion\WbemPerf\001
- HKLM\Software\Microsoft\Windows NT\CurrentVersion\WbemPerf\002
- HKLM\Software\Microsoft\Windows NT\CurrentVersion\WbemPerf\003
- HKLM\Software\Microsoft\Windows NT\CurrentVersion\WbemPerf\004
- HKLM\Software\Microsoft\Windows NT\CurrentVersion\WbemPerf\HBP
Files:- GeeSetup_x86.dl (Hash: dc9b5e8aa6ec86db8af0a7aa897ca61db3e5f3d2e0942e3190 74db1aaccfdc83)
- EFACli64.dll (Hash: 128aca58be325174f0220bd7ca6030e4e206b4378796e82da4 60055733bb6f4f )
- TSMSISrv.dll (Hash: 07fb252d2e853a9b1b32f30ede411f2efbb9f01e4a7782db5e acf3f55cf34902 )
- DLL in Registry: f0d1f88c59a005312faad902528d60acbf9cd5a7b36093db8c a811f763e1292a
- Stage 2 Payload: dc9b5e8aa6ec86db8af0a7aa897ca61db3e5f3d2e0942e3190 74db1aaccfdc83
Source:
https://www.ghacks.net/2017/09/21/cc...ad-discovered/
↧
September 21, 2017, 2:02 am
I and some other people had strong difficulties and problems in installing of firmware using Windows 10 64 bit.
I now explain my situation. I got my tv box with old firmware version 101 and I could describe the level of quality of this firmware as ridiculous and absolutely unsufficient for normal every day working. It was too raw, instabil, with interrupting LAN and Google Store without status bar and any possibility for easy to turn it off. I thought me what could one do with potentially very good hardware using on it so awful wry self-made softwares. But it always exists the last hope on next firmwares for betterment and improvement. But further a big surprise waited for me. The last hope died.
1. You can not upgrade it using OTA.
2. You can not upgrade it using recovery the recovery does not exist.
3. You can not upgrade it using a USB flash.
I guess Beelink encrypted everything in own firmware to noone steel it. And it is good right it is needed to save a such treasure. It was a sarcasm.
For users with 101 firmware is only one method to upgrade the tv box to use a special utility which install Realtek drivers for USB and flasher program. I tried it and stayed with a problem asking support service of Beelink.
Thus the Beelink support keeps silent I allow me to make some remarks about this situation.
The setup.exe program rkt mp usb utility tools has great problems in usb realtek generic drivers under windows 10 64 bit. After the successful installing setup.exe program the system just stops working the realtek generic USB driver with the code 10 in device manager windows.
Therefore the rtumdsam flasher program can never see the device Beelink sea and to flash it. In proof of this I inspected three different computers with windows 10 64 bit and the result was the same. Obviously it may take two causes -
1. The system conflicts with realtek driver on level of the system namely windows 10 64 bit.
2. On other side it is the conflict between hardwares for example third-party usb controllers etc.
3, Both
Dear coleague who had the same problem reinstalled the system on windows 7 and oh Wonder the system has seen the tv box.
I have the very bad 101 firmware from my tv box and I can not get the newer firmware thru OTA. What have I to do? Reinstall windows? Thank you very much.
Beelink company released very raw product with bugs and problems I spent my money and now I can not use the tv box completely.
I can not understand completely why Beelink has made such wonderful product and I do publish on Youtube this information especially about customers support to warn people of buying it. And yes lastly, the hidden encrypted Beelink firmware is very great know-how in tv boxes industry.
↧
↧
September 21, 2017, 2:20 am
Newbie please recommended a good TV box for live streaming app. For under 50 pound. Thanks
![]( "Wink")
Sent from my U22 using Tapatalk
↧
September 21, 2017, 3:23 am
link: https://goo.gl/d42YNj
It’s kinda hard to keep track of all MGCOOL action cameras on the market but today we have a closer look at the recently launched MGCOOL Explorer Pro 2. The action camera si equipped with a 2-inch touchscreen display, a revolutionary 6G Sharkeye wide-angle HD lens (not available on any other competing cameras), and it’ll be available in two colors: Black and Silver. The camera is also available at a competitive price, which makes it a very appealing device in its segment.![]()
Going more in depth, we learn that the previously mentioned 6G Sharkeye lens is supposed to help you correct video distortion and is well ahead of conventional lenses when it comes to transmittance of light and color revivification. The integrated Sony IMX179 backside-illuminated (BSI) sensor also enables users to capture videos even in low-light environment without sacrificing on quality. With this combo you’re able to capture high quality images and videos up to 170-degree ultra-wide-angle technology.
![]()
The MGCOOL Explorer Pro 2 comes with support for time-lapse and slow-motion video shooting. So you can let your creativity take advantage of that, filming sports or other fast paced activities. Powered by a 1050mAh battery, the MGCOOL Explorer Pro 2 is also capable of shooting up to 100 minutes of 4K video at 25fps.
![]()
The camera also ships with a tough and durable waterproof case, which can resist under water up to 30 meters. It is also possible to use it as a daschcam with Car Recorder mode. Plus MGCOOL added a feature to use the action camera as a security one via Home Burglar functionality.
The Explorer Pro 2 supports H.264 codec and is able to shoot images up to 16MP starting from 2MP. MGCOOL suggest to first insert a memory card and the install the companion app for Android and iOS before doing anything else. After you’ve done that you will be able to easily sync the images and videos from your camera to smartphone using the app.
↧
September 21, 2017, 4:33 am
Hi guys,
I bought a MXQ 4k (RK3229, the board is a R329Q_V2.0, wifi is SV6051P, there's a date stamped on 2017.01.17) used that has 6.0.1 MM rom on, but it had some Google Services issues, so i decided to upload another ROM.
From that moment, I've tried almost all roms on the Net, uploaded with AndroidTool, using the correct drivers and all roms don't work with my MXQ 4k (all roms show low blue light led with no hdmi signal and no boot).
The only ROM that works is this one:
http://freaktab.com/forum/tv-player-...882#post646882 (it boots, no wifi and ethernet working)
Can you please help me understand why only this rom works?
Thanks in advance!
↧
RK3399 CoreBoard specifications:
