Wondering if someone can help. I installed librelec+Kodi to my internal nand (MECOOL) after using it for a while from my microSD card. I now seem to be experiencing a lot of buffering from my SMB shares. If I boot back to my microSD card, there is hardly any buffering and it's really quick when skipping through a large mkv file. Any ideas?
↧
Libreelec - Internal install buffering
↧
Hudl 4.2.2
Hi I am new to all this is there any way I can update my hudl 1 from android 4.2.2 to 4.4.2 any help would be great thanks in advance for any help
↧
↧
sdcard problem
Hi I have beelink mini mx iii s905 tvbox. i bought class 10 cd card and installed flud and ttorrent applications. torrent downloading on internal memory is ok but on sd card is the problem. it starts on normal speeds 300-700 kb but after 2-3 sec. down to 0 kb. How can i solve this.
↧
briked rk3229 mxq pro 4k
i messed around with Android Tool 2.3 erasing the flash and trying to flash update-rk3229_5.1-mxq_4k-ota_v0-20160516.img i ended up with android tool displaying one maskrom device found , but i wasn't able to flash anything, now my pc doesn't even recognize the device.
What could i do?
What could i do?
↧
CCleaner: A Vast Number of Machines at Risk
This post was authored by: Edmund Brumaghin, Ross Gibb, Warren Mercer, Matthew Molyett, and Craig Williams
Update 9/18: CCleaner Cloud version 1.07.3191 is also reported to be affected
Introduction
Supply chain attacks are a very effective way to distribute malicious software into target organizations. This is because with supply chain attacks, the attackers are relying on the trust relationship between a manufacturer or supplier and a customer. This trust relationship is then abused to attack organizations and individuals and may be performed for a number of different reasons. The Nyetya worm that was released into the wild earlier in 2017 showed just how potent these types of attacks can be. Frequently, as with Nyetya, the initial infection vector can remain elusive for quite some time. Luckily with tools like AMP the additional visibility can usually help direct attention to the initial vector.
Talos recently observed a case where the download servers used by software vendor to distribute a legitimate software package were leveraged to deliver malware to unsuspecting victims. For a period of time, the legitimate signed version of CCleaner 5.33 being distributed by Avast also contained a multi-stage malware payload that rode on top of the installation of CCleaner. CCleaner boasted over 2 billion total downloads by November of 2016 with a growth rate of 5 million additional users per week. Given the potential damage that could be caused by a network of infected computers even a tiny fraction of this size we decided to move quickly. On September 13, 2017 Cisco Talos immediately notified Avast of our findings so that they could initiate appropriate response activities. The following sections will discuss the specific details regarding this attack.
Technical Details
CCleaner is an application that allows users to perform routine maintenance on their systems. It includes functionality such as cleaning of temporary files, analyzing the system to determine ways in which performance can be optimized and provides a more streamlined way to manage installed applications.
Source: :http://blog.talosintelligence.com/20...s-malware.html
Thanks RD and SC for Info
From the Register
Ondrej Vlcek, Avast's CTO, told The Register that there was "no indication that the second-stage payload activated" and hence no need to do a wipe and clean install as recommended by Cisco Talos. Vlcek added that the 2.27 million affected, "a small number compared to the overall user base", were largely users who were installing the software from scratch.
Update 9/18: CCleaner Cloud version 1.07.3191 is also reported to be affected
Supply chain attacks are a very effective way to distribute malicious software into target organizations. This is because with supply chain attacks, the attackers are relying on the trust relationship between a manufacturer or supplier and a customer. This trust relationship is then abused to attack organizations and individuals and may be performed for a number of different reasons. The Nyetya worm that was released into the wild earlier in 2017 showed just how potent these types of attacks can be. Frequently, as with Nyetya, the initial infection vector can remain elusive for quite some time. Luckily with tools like AMP the additional visibility can usually help direct attention to the initial vector.
Talos recently observed a case where the download servers used by software vendor to distribute a legitimate software package were leveraged to deliver malware to unsuspecting victims. For a period of time, the legitimate signed version of CCleaner 5.33 being distributed by Avast also contained a multi-stage malware payload that rode on top of the installation of CCleaner. CCleaner boasted over 2 billion total downloads by November of 2016 with a growth rate of 5 million additional users per week. Given the potential damage that could be caused by a network of infected computers even a tiny fraction of this size we decided to move quickly. On September 13, 2017 Cisco Talos immediately notified Avast of our findings so that they could initiate appropriate response activities. The following sections will discuss the specific details regarding this attack.
Technical Details
CCleaner is an application that allows users to perform routine maintenance on their systems. It includes functionality such as cleaning of temporary files, analyzing the system to determine ways in which performance can be optimized and provides a more streamlined way to manage installed applications.
Source: :http://blog.talosintelligence.com/20...s-malware.html
Thanks RD and SC for Info
From the Register
Ondrej Vlcek, Avast's CTO, told The Register that there was "no indication that the second-stage payload activated" and hence no need to do a wipe and clean install as recommended by Cisco Talos. Vlcek added that the 2.27 million affected, "a small number compared to the overall user base", were largely users who were installing the software from scratch.
↧
↧
GEARBEST Sales: UMIGI S2 Global Presale
UMIGI S2 Global Sale has started.
It looks like an interesting phone with a Helio P20 CPU, combined with 4GB RAM and 64 GB ROM.
This engine will be driven by an 5100 mAh Accu.
Promising so far...
Main Features:
Display: 6.0 inch 720 x 1440 pixels screen
CPU: Helio P20 Octa Core 2.3GHz
System: Android 6.0
Storage: 4GB RAM + 64GB ROM
Cameras: front 5.0MP + rear 13.0MP + 5.0MP with AF and flash light
Sensors: Accelerometer, Ambient Light Sensor, E-Compass, Gravity Sensor, Proximity Sensor
Features: GPS, A-GPS, Glonass
SIM Card: dual SIM dual standby, 1 Nano SIM card + 1 Nano SIM card or 1 Nano SIM card + 1 TF card
Networks:
GSM: 850/900/1800/1900MHz
WCDMA: 850/900/1900/2100MHz
FDD-LTE: 800/1800/2100/2600MHz
Maybe I will get a sample in my hands, so I can tell more details.
For more Details:
Gearbest
↧
MeLE PCG35 APO Mini PC - Intel Apollo Lake Celeron J3455 AC WiFi BT 4.0 Gig Lan Win10
Main Features:
● Incorporates a radiator-like design with fins in order to dissipate heat
● Include an SD card slot, an HDMI 2.0 port, a VGA port, 3.5mm audio jack, Gigabit Ethernet, 802.11ac WiFi, Bluetooth 4.0, and so on
● Preinstalled with Windows 10 Home 64-bit
● Integrates a 12 EV Intel HD Graphics 500 running at 750 MHz
● Dual-band WiFi 2.4GHz + 5GHz, 802.11 ac/b/g/n,
Gearbest
↧
$15 coupon:GKBMCMPL for MECOOL M8S PRO L YouTube 4K Streaming 3GB/16GB Android 7.1 Amlogic S912 KODI 17.3 4K TV BOX

MECOOL M8S PRO L YouTube 4K Streaming 3GB/16GB Android 7.1 Amlogic S912 KODI 17.3 4K TV BOX 802.11AC WIFI Bluetooth LAN HDMI
Highlights
YouTube 4K HDR & 3D Video
MECOOL M8S PRO L can make you surfer 4K HDR / 3D videos on YouTube and give you a private 3D home cinema. You can enjoy the shock of cinema-like 3D stereoscopic vision at home.
Amlogic S912
MECOOL M8S PRO L comes with Amlogic S912 CPU which is a high performance octa core 64bit chipset known for a maximum clock speed of up to 21.5GHz. Apps will never run so smoothly in other chipset devices. People can easily enjoy many hot games and APKs with its 3GB DDR3 RAM and 16GB Flash ROM.
DDR3 3GB RAM, eMMC 16GB Flash
It boasts DDR3 3GB RAM, and eMMC 16GB Flash, advantageous in performance, security and reliability, ascribing to the eMMC memory, ultimately delivering a richer end-user experience.
IEEE 802.11ac
IEEE 802.11ac, one of the wireless networking standards in 802.11 family, is developed in the IEEE Standards Association process for the purpose of high-throughput wireless local area networks (WLANs) on the 5 GHz band.
4K Resolution
The latest in a line of broadcast and media resolutions, 4K is due to replace 1080p as the highest-resolution signal available for in-home movies and television. With a minimum resolution of 3,840 pixels wide and 2,160 pixels high, making it the equivalent to two 1080p screens in height and two in length.
Specification
General | Brand: MECOOL Model: M8S PRO L Type: TV Box Color: Black |
Hardware | System: Android 7.1 System Bit: 64Bit CPU: Amlogic S912 Core: 1.5GHz,Octa Core GPU: ARM Mali-T820MP3 RAM: 3GB DDR3 ROM: 16GB |
Communication | Support 5G WiFi: Yes WIFI: 802.11 a/b/g/n/ac Bluetooth: Bluetooth 4.1+HS LAN Ethernet: 10/100M |
Media | Video decorder: H.265 4K @60fps 10btis, VP9 Profile 2, H.264 4K @30fps, AVS+ 1080P @60fps Video encorder: H.264 1080P @60fps HDR: HDR 10, HLG HDR Decoder format: HD MPEG1/2/4, H.265/HEVC, HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6, RealVideo8/9/10 Media format: Avi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg Music format: MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE Photo format: HD JPEG/BMP/GIF/PNG/TIFF |
Interface | 1* HDTV output 2.0 4K*2K @ 60Hz 2* High speed USB 2.0,support U DISK and USB HDD 1* TF CARD Support 1~32GB 1* 3.5 Phone out CVBS&L/R output 1* RJ45 LAN Ethernet 10M/100M |
Other Features | Language: Chinese, English, Germany , Japanese, Korea etc. 24 languages OTA Support: OTA update Network Function: Miracast, Airplay, Skype chatting, Picasa, Youtube, Flicker, Facebook, Online movies, etc. |
Power | DC 5V/2A |
Dimensions&Weight | Product weight: 0.110 kg Package weight: 0.400 kg Product size (L x W x H): 10.20 x 10.20 x 2.10 cm Package size (L x W x H): 17.90 x 11.00 x 6.50 cm |
Package Contents | 1 x Adapter 1 x TV Box 1 x IR remote control 1 x HDMI cable 1 x User manual |

Use the coupon:GKBMCMPL to get it at $57.99!
↧
Another Copy of Samsung S8!!!HOMTOM S8 4GB RAM 64GB ROM 18:9 5.7 Inch Screen $169.99 5 Stocks Limited Sales!!!
Link:https://goo.gl/2wkPvM
Highlights
- 5.7 Inch 2.5D HD+ Screen, 1440*720 Pixel
- MTK6750T 1.5GHz Octa Core
- Support Touch ID
- 4GB RAM + 64GB ROM, Support 128GB TF Card Expansion
- 13 MP (SW 16 MP) & 2 MP (SW 5 MP) Dual Back Camera + 8 MP (SW 13 MP) Front Camera
- Android 7.0 System
- 3400mAh Battery, Support Fast Charging
- Dual SIM: Micro SIM + NANO SIM / TF Card (Another SIM Slot Can Be Used in Combination with a NANO SIM Card or a TF Card)
- Band: GSM 850/900/1800/1900MHz, WCDMA 900/2100MHz, FDD-LTE B1/B3/B7/B20, Support 2G & 3G & 4G LTE Network
HOMTOM has announced that it is all set to introduce a new smartphone to the market, the HOMTOM S8. This is a device that follows in the footsteps of a number of other smartphones including the likes of the Samsung Galaxy S8 and S8 Plus, as the HOMTOM S8 employs the use of a display with an 18:9 aspect ratio. Which does mean that among other things, the display occupies a significantly increased amount of space on the front panel. In short, this is a smartphone boasting minimal bezels on each side of the device. HOMTOM is however, taking things further than just including an 18:9 aspect ratio, as this is also a smartphone that comes with a fairly compelling spec list overall.
![]()
For instance, the HOMTOM S8 comes loaded with 4GB RAM and 64GB internal storage. Which alone means this is likely to be a powerful smartphone. Although for those looking for even greater levels of storage, HOMTOM has also confirmed that the HOMTOM S8 will come equipped with expandable storage support (via microSD and supporting cards up to 256GB). Adding to those specs, the HOMTOM S8 is confirmed as coming powered by a MediaTek MT6750T octa-core processor (clocking at 1.5 GHz), along with a Mali T860 GPU.![]()
![]()
Coming back to the display briefly, and HOMTOM has also confirmed that the HOMTOM S8 will come equipped with a 5.7-inch display along with a HD+ (1440 x 720) resolution. Which although is a big display, due to the inclusion of an 18:9 aspect ratio, the HOMTOM S8 fits into a body more commonly associated with a smaller handset. Resulting in a phone that while big on the display, will still be a device that can easily be held and operated with one hand when needed.
Highlights
- 5.7 Inch 2.5D HD+ Screen, 1440*720 Pixel
- MTK6750T 1.5GHz Octa Core
- Support Touch ID
- 4GB RAM + 64GB ROM, Support 128GB TF Card Expansion
- 13 MP (SW 16 MP) & 2 MP (SW 5 MP) Dual Back Camera + 8 MP (SW 13 MP) Front Camera
- Android 7.0 System
- 3400mAh Battery, Support Fast Charging
- Dual SIM: Micro SIM + NANO SIM / TF Card (Another SIM Slot Can Be Used in Combination with a NANO SIM Card or a TF Card)
- Band: GSM 850/900/1800/1900MHz, WCDMA 900/2100MHz, FDD-LTE B1/B3/B7/B20, Support 2G & 3G & 4G LTE Network
HOMTOM has announced that it is all set to introduce a new smartphone to the market, the HOMTOM S8. This is a device that follows in the footsteps of a number of other smartphones including the likes of the Samsung Galaxy S8 and S8 Plus, as the HOMTOM S8 employs the use of a display with an 18:9 aspect ratio. Which does mean that among other things, the display occupies a significantly increased amount of space on the front panel. In short, this is a smartphone boasting minimal bezels on each side of the device. HOMTOM is however, taking things further than just including an 18:9 aspect ratio, as this is also a smartphone that comes with a fairly compelling spec list overall.

For instance, the HOMTOM S8 comes loaded with 4GB RAM and 64GB internal storage. Which alone means this is likely to be a powerful smartphone. Although for those looking for even greater levels of storage, HOMTOM has also confirmed that the HOMTOM S8 will come equipped with expandable storage support (via microSD and supporting cards up to 256GB). Adding to those specs, the HOMTOM S8 is confirmed as coming powered by a MediaTek MT6750T octa-core processor (clocking at 1.5 GHz), along with a Mali T860 GPU.


Coming back to the display briefly, and HOMTOM has also confirmed that the HOMTOM S8 will come equipped with a 5.7-inch display along with a HD+ (1440 x 720) resolution. Which although is a big display, due to the inclusion of an 18:9 aspect ratio, the HOMTOM S8 fits into a body more commonly associated with a smaller handset. Resulting in a phone that while big on the display, will still be a device that can easily be held and operated with one hand when needed.
↧
↧
purchase advice
Hello,
i'd like to buy a player easily supporting screen rotation out of the box or even with a little effort.
Any advice?
i'd like to buy a player easily supporting screen rotation out of the box or even with a little effort.
Any advice?
↧
Moving from libreelec to android
Been using an m8 box which came with libreelec installed but want to revert back to android. Does anybody have a tutorial of how to do this for somebody who has never done anything like this before.
Thanks
Sent from my iPhone using Tapatalk
Thanks
Sent from my iPhone using Tapatalk
↧
Custom Firmware for Probox2 EX
Hey all!
Now that newer KODI updates require Android lollipop to run i have been searching for a Lollipop-Marshmellow-Nougat-Oreo firmware for this tv box. But i have found none. It actualy seem like i am the only one in the whole world that bought this box. Have anyone come across a newer firmware other than the oficial ones from probox?
And why exactly isnt there any?
Edit: Clarifying
Now that newer KODI updates require Android lollipop to run i have been searching for a Lollipop-Marshmellow-Nougat-Oreo firmware for this tv box. But i have found none. It actualy seem like i am the only one in the whole world that bought this box. Have anyone come across a newer firmware other than the oficial ones from probox?
And why exactly isnt there any?
Edit: Clarifying
↧
Rom without pre root
Hi, I'm planning to buy this device (ultimate), and planning to put my cable application on it in order to stream live TV channels. But this app recognize root device , also with root hider.
I understood that this device comes with pre root super super, does anyone knows if the last updated rom can be installed without the pre root?
Thanks
I understood that this device comes with pre root super super, does anyone knows if the last updated rom can be installed without the pre root?
Thanks
↧
↧
TX1 S805 - Help Please
hey all
so i bought this a few weeks ago i decided to try change the firmware without backup first like an idiot rule 1 eyy ...
ill link it so you know what one it is https://www.gearbest.com/tv-box-mini...SABEgLAc_D_BwE
i installed a firmware via SDCARD, there was no errors during the installation, but once it restarted i getting recovery mode .. and what ever i try to install now , i get mount error / recovery/last_install error
i have tryed about 4/5 different firmware from the net and they all say the same
has anybody had this error before if so how do i resolve it ?
what firmware should i use ?? it was on 4.4.2 when was working fine
any help would be muchly appreciated
thank you
------
added
------
so i know alot of them say there a certain make model etc but are different due to china's finest :P
on the chip it is amlogic s805
so i bought this a few weeks ago i decided to try change the firmware without backup first like an idiot rule 1 eyy ...
ill link it so you know what one it is https://www.gearbest.com/tv-box-mini...SABEgLAc_D_BwE
i installed a firmware via SDCARD, there was no errors during the installation, but once it restarted i getting recovery mode .. and what ever i try to install now , i get mount error / recovery/last_install error
i have tryed about 4/5 different firmware from the net and they all say the same
has anybody had this error before if so how do i resolve it ?
what firmware should i use ?? it was on 4.4.2 when was working fine
any help would be muchly appreciated
thank you
------
added
------
so i know alot of them say there a certain make model etc but are different due to china's finest :P
on the chip it is amlogic s805
↧
New Tablet: Teclast T10 presale on GEARBEST.COM
Here comes the new Teclast T10 Tablet with interesting specs,
but watch out for yourself and keep the special prize in the promo time in attention.
Main Features:
● System: Android 7.0
Allows you to remain connected and productive
● MTK8176 Hexa Core 1.7GHz, up to 2.1GHz
Ultra-low-voltage platform and hexa-core processing provide maximum high-efficiency power to go
● 10.1 inch 10-point IPS Screen
Offers good experience for watching videos and browsing the Web. The 2560 x 1600 resolution boasts impressive color and clarity
● 4GB RAM 64GB ROM
Provides enough room for your use, can suit all your needs
● 128GB TF Card Expansion
Accepts compatible card up to 128GB ( not included ) for easy expansion
● Dual Cameras for Photos and Face-to-face Chat
8.0MP AF rear-facing camera + 13.0MP front camera let you capture memorable moments or chat with friends
● Dual Band 2.4GHz / 5.0GHz WiFi
Dual WiFi wireless Internet, allows you to connect to the Web while within range of an available wireless network
For more Details --- Gearbest.com
↧
OUKITEL DOUBLE: K10000Max and K3 on Gearbest.com
This time let the pictures speak for themselfs, no words are needed for these very different phones.
![Click image for larger version
Name: k10000maxDouble.png
Views: 2
Size: 240.9 KB
ID: 671839]()
The K10000max seems to be a well sorted answer for all, who watch out for a rough Outdoor Phone with a power plant as battery in a handsome design.
![Click image for larger version
Name: k10000maxDouble2.png
Views: 1
Size: 245.8 KB
ID: 671837]()
For more Details --- Gearbest.com
The K3, second candidat in the OUKITEL DOUBLE on GEARBEST comes up in a very noble design with powerful hardware inside and a strong battery.
The K10000max seems to be a well sorted answer for all, who watch out for a rough Outdoor Phone with a power plant as battery in a handsome design.
For more Details --- Gearbest.com
The K3, second candidat in the OUKITEL DOUBLE on GEARBEST comes up in a very noble design with powerful hardware inside and a strong battery.
↧
H96 PRO Plus - hardware mods!
Hi everyone,
I see mods in different threads, so post your hardware mod , question here...
I wanna see mods like cooling vents, heat sink tweaks, fans , lights, board revision and more...
i even want to run this box on a power bank so it will run on battery in case of power failure when flashing...
Please collect your knowledge on cooling , tweaks , wifi antenna mod temperatures here...
I see mods in different threads, so post your hardware mod , question here...
I wanna see mods like cooling vents, heat sink tweaks, fans , lights, board revision and more...
i even want to run this box on a power bank so it will run on battery in case of power failure when flashing...
Please collect your knowledge on cooling , tweaks , wifi antenna mod temperatures here...
↧
↧
Amlogic S805X Processor is Designed for Low Cost TV Boxes with 1080p H.264, H.265 and VP9 Video Support
The low end of the TV box market is now highly competitive with Rockchip and Amlogic battling to offer the cheapest solutions available, as we’ve seen in a recent factory price list of TV boxes with RK3229 based devices selling for as low as $17.8, and Amlogic S905W based boxes going for $17.5 and up (per unit) for orders of 200 pieces. Amlogic has been working on an even lower cost SoC with Amlogic S805X based on four Cortex A53 cores, the same Mali-450MP GPU, but no 4K support, and instead H.264, H.265 and VP9 video decoding up to 1080p60, as I found out in a document shared on Amlogic Open Linux website.
A
Amlogic 805X will be quite similar to Amlogic S905X and S905D with the same CPU by clocked at a lower 1.2 GHz frequency, the same penta-core GPU, TrustZone support, and Fast Ethernet. The main difference is that in order to lower costs, they limited the multimedia capabilities to 1080p video decoding, and 1080p video output. Those last two actually make it more similar to Amlogic S805 SoC, but instead of a four Cortex A5 32-bit cores, S805X comes with more powerful Cortex A53 64-bit cores.
The processor is likely be used in both Android and Linux TV boxes, as the company’s Mbox P241 reference platform / development board based on S805X SoC, comes with either 512MB DDR3 or 1GB DDR4, coupled with eMMC flash, and an AP6255 wireless module supporting 802.11 b/g/n/ac and Bluetooth 4.2.
I’ve yet to see any S805X TV boxes, even on Alibaba, but I’d expect them to sell retail for around $20 including shipping. The processor could also be an interesting choice for low cost development boards, competing against Allwinner H5 solutions.
Source: CNXSoft

Amlogic 805X will be quite similar to Amlogic S905X and S905D with the same CPU by clocked at a lower 1.2 GHz frequency, the same penta-core GPU, TrustZone support, and Fast Ethernet. The main difference is that in order to lower costs, they limited the multimedia capabilities to 1080p video decoding, and 1080p video output. Those last two actually make it more similar to Amlogic S805 SoC, but instead of a four Cortex A5 32-bit cores, S805X comes with more powerful Cortex A53 64-bit cores.
The processor is likely be used in both Android and Linux TV boxes, as the company’s Mbox P241 reference platform / development board based on S805X SoC, comes with either 512MB DDR3 or 1GB DDR4, coupled with eMMC flash, and an AP6255 wireless module supporting 802.11 b/g/n/ac and Bluetooth 4.2.
I’ve yet to see any S805X TV boxes, even on Alibaba, but I’d expect them to sell retail for around $20 including shipping. The processor could also be an interesting choice for low cost development boards, competing against Allwinner H5 solutions.
Source: CNXSoft
↧
GT1 704NO standrad/ultimate 2G+16G/2G+32G/3G+32G A912/AX12(AP6255) stable !!!
Hello everyone,
Here is coming new firmware 704 stable version!![]()
Here is coming new firmware 704 stable version!

Current version: GT1_704NO_
Based version: GT1_703NO_
Android Version: 7.1.2
Fits for : standrad/ultimate 2G+16G/2G+32G/3G+32G A912/AX12(AP6255 )
USB burning tool :
https://beelink-my.sharepoint.co ... 4JInsGgzNYvz5qnW-9c (2.0.5)
https://beelink-my.sharepoint.co ... uaAYAcoK-dm4kmsvCs4 (2.0.9)
USB zip :
https://beelink-my.sharepoint.com/person...XMifFHP7sw
SD card zip :
https://beelink-my.sharepoint.com/pe...ih0orBVeAcdOzo
Updating tutorial:
https://beelink-my.sharepoint.co ... IGNebOVawJBgXVcPJ_Q (USB updates)
Updating tutorial:
https://www.youtube.com/watch?v=saZWCyXVETQ&t=333s (SD card)
Improvement:
1. Application of vertical screen shows full.
2. Integrate AurtoReboot.apk
3. On the main interface, please continuously press the Key 8 on remote three times to enable AutoReboot.apk.
4. There is no icon of AutoReboot.apk in APP List.
Pay attention to :
1.No navigation bar as previous ! please think twice before updating .

2. A912/AX12-----AP6255 G912/S912-----QCA9377
If you have any problem, please contact with me at any time:
chanchan@bee-link.com ![]()

↧
R-TV BOX S10 KODI 17.4 ANDROID 7.1.2 S912 TV BOX FIRMWARE UPDATE 20170920
As Found
Glad to share the firmware for R-TV BOX S10 TV Box.
PC Flash Firmware
R-tvbox-s10_9377_mac_20170912.7z
Flash guide, please refer to: http://blog.geekbuying.com/index.php...utorials-tool/
Change log: This firmware update solves the problem of clicking + to increase application shortcuts.
Source: blog.geekbuying
Glad to share the firmware for R-TV BOX S10 TV Box.
PC Flash Firmware
R-tvbox-s10_9377_mac_20170912.7z
Flash guide, please refer to: http://blog.geekbuying.com/index.php...utorials-tool/
Change log: This firmware update solves the problem of clicking + to increase application shortcuts.
Source: blog.geekbuying
↧