Quantcast
Channel: FreakTab - Freaktab Forums
Viewing all 11099 articles
Browse latest View live

OUKITEL WP1 Goes Through 8 Ways of Waterproof Challenges

$
0
0
Click image for larger version

Name:	OUKITEL WP1 smartphone.jpg
Views:	1
Size:	127.5 KB
ID:	748167




OUKITEL smartphones has been favored by users due to its long battery life. Since they began to manufacture rugged phones which combines large battery and tri-proof features, the new WP series gained a lot of fans immediately. The latest announced smartphone WP1 not only features a 5000mAh massive battery, but also owns tough waterproof, dust-proof and shock-proof functions. As a new rugged phone, it won’t be accepted without severe challenges and testings. So OUKITEL staff is taking many tests by throwing it to many kinds of common liquid in our daily life to show its waterproof performance.

Video: WP1 waterproof challenges by 8 ways:



WP1 was thrown into several kinds of liquid which we use or drink in our daily life: cooking oil, soy source, vinegar, cooking wine, Pepsi-cola, peanut milk, instant coffee, and cleanser. Without any doubt, WP1 survived from all these challenges with no pressure. As an IP68 Grade waterproof phone, the standard soaking depth for waterproof is 1.5 meters,30 minutes. Meaning that WP1 is still working fine after half an hour soaking under 1.5m water.

Except for waterproof features, WP1 is also anticipated due to the specs. Featuring a 5.5 inch display, nor too big or too small, just the right size to fit your hand. It is confirmed to be powered by MediaTek MT6763 octa-core processor which is clocked at 2.0Ghz, together with the 4GB RAM and Android 8.1 Oreo OS to ensure powerful performance. The 5000mAh battery is enough for one day use, and with 9V/2A quick charger, it will save much charging time too. Also it supports 10W wireless charging, a good way to keep it energetic. How do you like this WP1? Feel free to comment below.


Media Players for All Gearbest

$
0
0
2018.10.10 ~ 2018.10.31
Tanix TX3 Mini L TV Box
$29.99 coupon code: GBTXL3: amount: 200


www.gearbest.com
Warehouse: China
***********
2018/10/11 ~ 2018/11/10
Alfawise Z1 TV BOX 2+16
$54.99 flash sale: amount: 50


www.gearbest.com
Warehouse: china
***********
2018/10/11 ~ 2018/11/10
Gocomma USB3.0 to SATA / IDE Hard Disk Adapter Converter
$15.99 flash sale: amount: 158


www.gearbest.com
Warehouse: china
***********
2018.10.10 ~
Xiaomi Mi Box S with 4K HDR Android TV Streaming Media Player and Google Assistant Remote
$89.99 (Pre-Sale)


www.gearbest.com
Warehouse:
***********
2018.10.10 ~ 2018.10.17
A5X MAX+ TV Box
$55.99 flash sale: amount: 100


www.gearbest.com
Warehouse: china
***********
2018.10.10 ~ 2018.10.17
MX10 PRO TV Box with Digital Display
$47.99 flash sale: amount: 100


www.gearbest.com
Warehouse: china
***********
2018.10.10 ~ 2018.10.17
XGIMI CC Mini Portable Projector LED 1080P Full HD - BLACK
$479 coupon code: IT$CN16CCI: amount: 50


www.gearbest.com
Warehouse: china
***********

Best firmware for Scishion V88 mini ?

$
0
0
Hello,
I have a Scishion V88 mini (XT-MX4MN-V13).
(Android 6.0 + 4 Core RK3229 + 1GB RAM)
I wonder which firmware i could install. My main issue today is missing DRM Widewine.

Do you have any idea ?

Thanks a lot for your support

Get Blackview BV9500 Pro at ONLY $386.99 Now with Wireless Charger

How to instal Supersu on RK3399 boxes

$
0
0
Hello.

Please i have x99 rooted but i need supersu installed.
i have tried many supersu apk versions but none of them installed.
always same error " could not be installed ".
Please help.

Best regards,

Sent from my SM-J730G using Tapatalk

Help with Mini HK1 Firmware

$
0
0
I purchased a Mini HK1 RK3229 2GB-16GB TV Box Android 8.1 online that came with SuperUser app for root. The box was working fine, I tried to install SuperSU app, and it asked for reboot. Once I rebooted I got stuck at boot. I am hoping I can get the firmware to fix it, or if you recommend some other way to reset it.

I tried to find the firmware online with no luck at all! The Build is (RK322x_box-userdebug 8.1.0 OPM5.171019.019 eng.user.20180825.171904 test-keys). I have a friend that has the same box, is it possible to somehow extract the image.

Need unrooted SD firmware for Vorke Z6

$
0
0
Hallo.Please someone post me a link with latest stock Vorke Z6 unrooted firmware.I have problems with some provider's app.thank you a lot dudes.

Powerful Rugged Smartphone with Dual Back Camera & 6GB RAM

$
0
0
After the Success of Poptel P10, now Poptel going to launch powerful Rugged gaming smartphone Poptel P60.

according to the official YouTube video, it will come with 3 colors ( Black, Green, and Orange ) with 5.7" FHD+ display protected by Corning Gorilla Glass, 6GB RAM, 128GB ROM, Helio P23 Processor, NFC, yep, dual rear AI camera 16MP+5MP, 8MP front, Android 8.1, fingerprint sensor and Advance AI Face unlock.
The Company is targeting Samsung Active S8 and Cat S61 to give tough competition. what are your opinions?

Q10 PRO FIRMWARE. FUTEKO. HMD-2.1.0 2018-09-20

$
0
0
OFFICIAL Q10 PRO FIRMWARE ANDROID 7. FUTEKO. HMD-2.1.0 2018-09-20

Internal build number: HMD-2.1.0 2018-09-20.022650

** THIS FIRMWARE IS FOR Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER.

** THIS FIRMWARE IS FOR EUROPEAN HIMEDIA Q10 PRO ONLY!

** DO NOT INSTALL ON CHINESE HARDWARE VERSION Q10 PRO OR OR PREVIOUS GENERATION Q10 4K3D.

** YOU WILL LOSE ALL USER INSTALLED APPS AND SETTINGS! PLEASE BACK UP BEFORE UPDATING (Kodi backup: http://kodi.wiki/view/backup).

Changelog:

1. Fix the issue 'the Google Search App may automatically run if switch TV resolution'
2. Fix the issue 'the MediaCenter sometimes has no response'
3. Fix the issue 'power on the box--click Media Center and enter a folder--playback a video in the folder--press Return button on the remote control won’t go back to the folder'
4. Modify some words of the MediaCenter
5. Fix the issue 'when Factory Default the box, the LED display status still not set as factory default'
6. Fix the issue 'remote control unable to turn off the box sometimes'
7. Fix the issue 'HDMI without output sometimes'

Download & Instructions

THIS FIRMWARE CAN ONLY BE INSTALLED ON A EUROPEAN Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER! Information on how to update from earlier firmware to Q10 Pro version 2.0.4 is here.

Your current firmware version can be found at Settings - About - Device Info - Build number.

Download: https://www.mediafire.com/file/0zqqy...22650.zip/file

1. Extract update.zip (using an unzip program like 7zip, winzip etc) from the downloaded zip archive to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip'). Note, there is no need to rename anything!
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 7 coloured circle logo.
6. When you see the circle logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new firmware. Allow boot to complete.

Source: Futeko

( Official International Version ) Original Xiaomi Mi TV Box

$
0
0
2018.10.13 ~ 2018.10.22
( Official International Version ) Original Xiaomi Mi TV Box
$55.99 coupon code: flash sale: amount: 3000


www.gearbest.com
Warehouse: HK
***********

H96 pro+ & beelink gt1 ultimate

$
0
0
I don't suppose anyone has any 6.0 (marshmallow) firmware for the h96 pro+ wisdom & beelink gt1 ultimate A706DB. I've searched around a little n downloaded / flashed some firmware but although they were advertised as 6.0 they turned out to be 7.1.2.

Not too keen on nougat, doesn't seem to perform as good as my s905x box running 6.0 even though the s912 should be way better. Thanks

magisk boot image patched by other programs :: Solution?

$
0
0
Deaf guys, received an H96 mini S905w which came with kouch SU. Now tried to flash Magisk but installation was refused...

Even flashing unSu did not work!

Anyone can help out?

Kind regards

H96 pro plus

$
0
0
So I have now update all 3 of my H96 pro plus boxes to superceleron firmware with perfect success on them. Than my father in law asked if I could do the same to both of his boxes. And I put the sd card into the side and held down the reset button with a toothpick than went to plug the power in and go the android dude come on there and it said upgrading and then the screen disappeared and went to a blue screen and it says no signal haha. Both of his boxes this happened to, and I have plugged one of mine into the HDMI to ensure that it wasn't the cable and it worked perfectly.

Now I can't even get the boxes to do a reset to set back to stock configuration. Worst part about this all is that it's my father in law hahaha.

I am kinda stuck now with two of his boxes that are just paper weights.

SD card ext4 mount

$
0
0
Hello
I have a Minix X8H-PLUS with Finless Rom 5.1.1 1.0.
I need to mount an 128GB SD card formatted EXT4 and it must be seen by all applications (read and write).
Can anyone help Me?

Many Many Thanks

Mao

Mecool M8S Pro LB - Noob needs clarification / TWRP, Magisk,...

$
0
0
Hey Guys,
im not a 100% Noob, but before i Start, i want to make sure i avoid bricking my new Box i just received.... ;-)
As i found a lot of Posts and some Tuts about that Mecool M8S Pro L-Box, but for the "LB" Version mostly negative Comments, im a bit in doubt. Could somebody please just give me "green light" for my Infos and Plans? :-) :-)

I want to install TWRP to make (Nandroid)Backups, and to install Magisk as Root-Manager

- There are no Custom Roms for the LB-Version
- However, it is safe to install TWRP (Witch Version? Same as for the 'non-LB' Version?) via SD-Card/Usb
- Installing latest Magisk via TWRP is Safe as well
- Installing Both wont break any DRM-Stuff (like Netflix HD and so on)

- Though its ATV-Version, its possible to sideload any Android App
- Its possible to Sideload (PlayStore) Paid Apps, as Licence-Check is done by Google

Thankin you for a quick clarification! Im excited about starting using that little promising Box! :-)

Yundoo Y8 Autoboot request, Please Help

$
0
0
Hi,

So I'm hoping someone can help I'm using the superceleron ROM, SCV1 7.1.2, I recently decided to repurpose this box for my car media, and i am trying to make the box boot automatically when it receives power. I have learned that I will need to modify the init.rc file in the boot image, however i have been unable to successfully access it with tools for other RK boxes.

I can see that the init.rc has parameter to watch for the button push before booting. Is there any way you could help me with getting it to autoboot when plugged in? Or point me to the information I need to edit the boot image properly and recompile. I have a copy of the ROM image, and i think i have a pulled version of the boot image from the device, but i can't seem to get any meaningful info when i unpack the boot img, the ramdisk is empty.

Ultimately what i would like to do is have the box power up automatically when the car turns on. The screen does have a hood that opens and closes so i was exploring the possibility of adding a microcontroller to turn the screen on and off, but that is a separate issue. I have programmed a custom button array for Home/Back/Recents/media player, and notifications, so if i could find a shortcut for standby mode, that would be helpful too, but a secondary issue to auto power on.

Any and all help would be greatly appreciated.

Ron

Please help fix - Scishion AI One - Willing to pay for help

$
0
0
I own two bricked devices, I got the firmware from Gearbest's support themselves.

I tried to upgrade/restore firmware using rockchip batch tool, but no luck.

Boots for two seconds and then screen goes black!

What am I missing here ?

[Bricked] Mecool M8S PLUS L box stuck on boot animation, need some help!

$
0
0
Hello, I tried installing SuperSU on my box and after updating the SU binary, it said I should reboot. When I did that my box got stuck on boot animation. I think I have bricked it. I have been searching but I cant find proper guide on how to unbrick it, so if you could kindly help me that'd be much appreciated!

[Request] Mecool M8S PLUS L stock firmware needed

$
0
0
I can't find any rom for this box, if you have please share thankyou!

[Bricked] Mecool M8S PLUS L box stuck on boot animation, need help!

$
0
0
Hello, I tried installing SuperSU on my box and after updating the SU binary, it said I should reboot. When I did that my box got stuck on boot animation. I think I have bricked it. I have been searching but I cant find proper guide on how to unbrick it, so if you could kindly help me that'd be much appreciated!
Viewing all 11099 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>