Quantcast
Channel: FreakTab - Freaktab Forums
Viewing all articles
Browse latest Browse all 11099

GS1_104N0 (2G+16G)

$
0
0
Hi dear , here comes the firmware for GS1_104N0 !
Current version : GS1_104N0
Based on : GS1_101N0/GS1_103N0

USB zip :(update_GS1_104N0.img):


https://beelink-my.sharepoint.com/pe...qiaRY&e=OTOOe1


SD card zip : (ota_GS1_104N0.zip):

https://beelink-my.sharepoint.com/pe...Ccqd4&e=3Hmrq3


usb burning tool :



https://beelink-my.sharepoint.com/pe...oSJv8&e=jb7TWh


Improvement :


1. Sometimes some errors occur to this device when the frame rate is not consistent with HDMI output frequency ,

such as image trembles often . now you
can solve this problems with a method , some tips as follows ,

Settings->advanced display >(√) Playback auto switch FPS

PS : It may get a black screen briefly .

2. Kodi can perform much more better than before .

3. Some shortcuts have been added to remote for popular demands , as the picture shows,





4. Google chrome has been reinstalled for you .

5. You could get more wonderful experience on dolby and dts .

PS :Now you can update this device from the GS1 101N0 to GS1 103N0 with SD card also .

USB updating :

1. Install the allwinner USB burning tool first 。


2. Click the PhoenixUSBPro.exe in your desktop and run it .

3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface .

5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0

is used for updating but USB3.0 . after that , it is a recognization sign that the red X ( upper right corner)turns

green .

6. Finish this updating .


SD card updating :

1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box .

2. go in the setting > click the option of "about the media" > choose the first option > choose file >

load the ota_GS1_101N0.zip .

3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update

mode , you need to make sure that Power supply must be firmly good enough to finish this updating , power outages

would
contribute to a failure .

you can contact with me if you meet some problems .

email : chanchan@bee-link.com / skype : +86 18772960513

Viewing all articles
Browse latest Browse all 11099

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>