Hi dear , here comes the firmware for GS1_102N0 !
Current version : GS1_102N0 2G+16G
Based on : GS1_101N0 2G+16G
Improvements :
1. We solved the problem that some updates zips have been used wrong ;
2. The problem that the enable startup wizard option has no reponse in setting when you click it has been solved ;
3. Now the HD over 2TB can be available for you really ;
4. The TF card can be a way to update your device ;
5. The music player won't be seen in video files ;
6. You can get a better user experience when you watch a movie ;
7. Now the back button can be used freely when you open the kodi ;
8. Wifi problems get improvements now .
USB zip :（update_GS1_102N0.img）：
https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=18ce4784844814aeaafdace1237 38a1a8&authkey=AYSNt52FFsFiPgpg5h52Q8E&e=e6f9416bc d0b4d508d99f6cf4eaa07bf
SD card zip : （ota_GS1_102N0.zip）：
https://beelink-my.sharepoint.com/pe...98fdfb9887c44d
usb burning tool :
https://beelink-my.sharepoint.com/personal/firmwareservice_beelink_onmicrosoft_com/_layouts/15/guestaccess.aspx?docid=12dc4c7891e8644a0bee6b900dd 3d0b97&authkey=AccwbdLr_86eEGEEucoSJv8&e=916044d23 0f6469689be6c709dbf403d
USB updating :
1. Install the allwinner USB burning tool first ;
2. Click the PhoenixUSBPro.exe in your desktop and run it ;
3. Click the upper left button to load the firmware file from your pc ;4. Click the lunch button on this interface ;
5. Hold the reset hole and then connect with the computer and tv box , you should keep in mind that the USB2.0 is used for updating but USB3.0 . after that , it is a recognization sign that the red X ( upper right corner）turns green .
6. Finish this updating .
SD card updating :
1. copy this file (ota_GS1_101N0.zip) to your TF card or U-disk and then insert the TV box ;
2. go in the setting > click the option of "about the media" > choose the first option > choose file > load the ota_GS1_101N0.zip ;
3. the systen will recognize this update zip automatically when you run it well and then shut down to go in the update mode , you need to make sure that Power
supply must be firmly good enough to finish this updating , power outages would contribute to a failure .
you can contact with me if you meet some problems .
email : chanchan@bee-link.com / skype : +86 18772960513